# Different duration after testrun and seconds instead milisecs

**URL:** <https://forum.opentap.io/t/different-duration-after-testrun-and-seconds-instead-milisecs/208>\
**Category:** Technical\
**Created:** [January 22, 2021, 1:54pm UTC](https://forum.opentap.io/t/different-duration-after-testrun-and-seconds-instead-milisecs/208 "2021-01-22T13:54:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![LXuser](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.opentap.io/lxuser/32/145_2.png) [@LXuser](https://forum.opentap.io/u/LXuser)\
**Post date:** [January 22, 2021, 1:54pm UTC](https://forum.opentap.io/t/different-duration-after-testrun-and-seconds-instead-milisecs/208/1 "2021-01-22T13:54:42Z")

</div>

Hello,  
when exeuting a teststep then the duration is displayed after each teststep and also in the log.  
But why does it show different values?

And why is the resolution only in seconds? In the logfile in the first line there is a another value in ms.  
I would prefer to see the teststep duration also in ms.

Thx

 ![DifferentTime](https://us1.discourse-cdn.com/flex020/uploads/opentap/original/1X/994a97d1051371b1a8c0514e67a3e5cbef8929d6.jpeg)

---

<div class="post-metadata">

**Author:** ![brennen\_direnzo](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.opentap.io/brennen_direnzo/32/6_2.png) [@brennen\_direnzo](https://forum.opentap.io/u/brennen_direnzo)\
**Post date:** [January 22, 2021, 3:19pm UTC](https://forum.opentap.io/t/different-duration-after-testrun-and-seconds-instead-milisecs/208/2 "2021-01-22T15:19:36Z")

</div>

For the ms vs s this scales dynamically based on how long the actual test takes (you’ll notice at the bottom or your screen there is a us timestamp).

For the mismatch, what value are you using in the Time Delay setting? I wasn’t able to reproduce this, but it does seem similar to another issue we have had reported.